Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
INTEGRATED PANEL DIMENSION
MODEL SPRWBC052D3SS-P
Integrated Panel Dimensions are metric measurements rounded and optimized.
NOTICE
Due to difference in surrounding cabinetry the panel may not perfectly align with the door. The procedure
below is designed to provide a finished panel that seamlessly integrates with surrounding cabinetry.
Panel Preparation: a fully integrated door panel completely covers the door frame and provides a built-in
appearance.
NOTICE
The door panel must not weigh more than 20 Lbs (10 Kg). It is important to ensure that all drilled holes are
drilled to the correct depth in order to avoid splits in the wood when hardware is installed.
• Cut the panels to the dimensions listed in the diagram below.
• Optional: Stain or finish the panel to desired stain or color. Be sure to closely follow the instructions
provided by the manufacturer.
• Optional: Install handles and hardware.
NOTICE
The appliance will need up to 870mm (34.25 inches) to the under side of the counter to leave room for
leveling adjustments.
When applying an integrated frame to a unit, ensure that both sides are finished in order to prevent
warping. In some frame installations, the panel may be visible through the glass while the door is open.
12
Publicité
