have to be met:
The unit has to be placed on a solid, flat, horizontal, and non-slipping surface with a sufficient
●
weight-carrying capacity.
Make sure that the unit cannot topple over.
●
Choose the location in such a way that children cannot reach the connecting cable of the
●
unit.
Do not place the unit on hot surfaces, such as hotplates, or near them.
●
Never use the unit outdoors, and always keep it in a dry place.
●
Do not use the unit near flammable materials (such as curtains, drapes or similar objects) to
●
avoid fire.
The unit is not designed for installation in a wall or a built-in cupboard.
●
Do not set up the unit in a hot, wet or moist environment.
●
The socket has to be easily accessible so that the power cable can be removed easily in
●
case of emergency.
ELECTRICAL CONNECTION
For safe and fault-free operation of the unit, the following requirements have to be met during
the electrical connection:
Before connecting the unit, compare the connecting data (voltage and frequency) on the
●
type plate with those of your energy network. These details must correspond so that no dam-
age occurs to the unit. In case of uncertainty, contact a qualified electrician.
The socket has to be protected at least by a 10 amps circuit breaker.
●
Make sure that the connecting cable is not damaged and not laid across hot surfaces or
●
sharp edges.
The connecting cable must not be stretched tightly.
●
The electric safety of the unit is ensured only when it is connected to a socket with protec-
●
tive conductor installed correctly. Operation on a socket without protective conductor is
forbidden. If in doubt, let the house installation be checked by a skilled electrician. The man-
ufacturer does not assume responsibility for damage which has been caused by missing or
interrupted protective conductor.
PRIOR TO FIRST USE
Clean all parts as described under "Cleaning".
●
Put the dough hook in the breadbox and place it in the unit.
●
Start the program 35 (baking only) for 30 minutes.
●
Let the unit, the breadbox and the dough hook cool.
●
After cooling, clean all parts again as described under "Cleaning".
●
DE
EN
FR
NL
IT
DK
SE
NO
PL
CZ
SK
SL
25