Elcometer BALTIC 30 Manuel D'utilisation page 9

Insofar as possible, cover the containers of product to be transferred to prevent its contamination.
Do not use the hoses to move the equipment by dragging it. Keep the hoses away from moving parts
and heated surfaces. Do not place them in contact with products that may affect them and do not
expose them to temperatures greater than 65
Insofar as possible, keep the container of the product to be transferred fixed and inserted into it, the
product return tubing (probe) (Nº03 in Figure 3).
The unit has been designed for a long service life and can be used with most of the usual products
on the market. Its use with highly aggressive products will quickly increase the need for maintenance
and spare parts. If you need to apply special products, please contact ELCOMETER Ltd.
If the equipment is going to remain for a long time running empty, disconnect it from the general air
network.
ELCOMETER recommends the installation of some sort of SAGOLA air
treatment equipment in the general compressed air network, in order to
optimise the operation of the equipment.
07. Functional description of the equipment
The Baltic 30 equipment can be used to apply conveniently diluted products used widely in the
Construction, Automotive, Timber, Plastics Industry, etc.
Unit featuring a pneumatic cylinder that activates the hydraulic device which provides the pressure
necessary to spray the product.
The unit can be supplied in the following versions:
- Gravity deposit
- Absorption probe
Suction probe version
The product to be applied is kept in the container supplied
by the manufacturer. From the manufacturer's container, with
the unit in operation, by means of suction and through the
probe it flows to the interior of the unit.
From the unit, through the product hose and the gun, the
product is sprayed.
Product deposit version
The product to be applied is introduced into the unit's gravity
deposit. From the product cup it is fed by gravity to the interior
of the unit.
From the unit, through the product hose and the gun, the
product is sprayed.
www.elcometer.com
o o
C or less than –20 C.
Absorption
probe
Product Product
deposit deposit
EN 07