Craftsman CMXEVBE17250 Mode D'emploi page 14

Les langues disponibles

Cleaning and Disinfecting the

Wet/Dry Vac

To keep your Wet/Dry Vac looking its best, clean the outside

with a cloth dampened with warm water and mild soap.

To clean the Drum:

1. Dump debris out.

2. Wash Drum thoroughly with warm water and mild soap.

3. Wipe out with dry cloth.

Before prolonged storage or as needed (i.e., waste water

pick up) the Drum should be disinfected.

To disinfect the Drum:

1. Pour 1 gallon (4 L) of water and 1 teaspoon (5 mL)

chlorine bleach into the Drum.

2. Let solution stand for 20 minutes, carefully swishing

every few minutes, making sure to wet all inside surfaces

of the Drum.

3. Empty Drum after 20 minutes. Rinse with water until

bleach smell is gone. Allow Drum to dry completely

before sealing the Motor on the Drum.

SP7097-2 CMXEVBE172500.indb 13

Storage

Before storing your Vac, the Dust Drum should be emptied

and cleaned. The Power Cord should be wrapped around

the Accessory Holder Tabs, located on the back of the

Powerhead Assembly. The Hose should be stored as

described in this manual. Accessories should be kept in

the same area as the Vac so they can be readily available.

The Vac should be stored indoors.

WARNING:

To assure product SAFETY and RELIABILITY, any other

maintenance, repairs and adjustments should be

performed by Authorized Service Centers, always using

CRAFTSMAN replacement parts.

11/16/21 11:23 AM