LENCO DAR-030BK Mode D'emploi page 16

Rotate the ok knob to scroll to the Alarm sound 'source'. You can choose between Buzzer, DAB+
Radio or FM. Short press the ok button to confirm.
Rotate the ok knob to scroll to 'duration'. You can choose 15, 30, 45, 60, 90 or 120 minutes. Short
press the ok knob to confirm.
Rotate the ok knob and select 'Volume' to set the volume for your alarm. Rotate the ok knob to set
the volume. (The minimum volume you can select is 4). Short press the ok knob to confirm. Your
Alarm is now ready for use.
Note: The alarm volume will increase progressively until it reaches the alarm volume you have set.
Repeat the above steps to set Alarm 2.
Snooze Function
When the alarm sounds, you can press the ok knob to snooze. The default snooze time is 9 minutes.
To stop the alarm, press the 'on/off-Mode' button.
Bluetooth function
Turn on the radio and short press the Mode button until Bluetooth mode is selected. Turn on the
Bluetooth on your Bluetooth device, search for devices and then select "Lenco DAR-030". Click it to
pair. When connected successfully you will hear a voice "connected".
You can press the Stations button to select previous track or the back button to go to the next track.
You can press the ok knob to play or pause the music playback.
The volume can be adjusted by turning the ok knob up- or downwards (note that the volume level is
not synced with the Bluetooth device, meaning you have to turn up the volume of your Bluetooth
device manually first)
To disconnect the existing pairing and pair with new device just press and hold the ok knob.
"This product has a bluetooth reception function, you can't transmit any bluetooth sound with it:
this means that you can receive wirelessly a bluetooth sound signal from an external source like a
smartphone."
16