LENCO DAR-030BK Mode D'emploi page 15

Short press the Select knob to store the station. The message "Preset XX saved" will appear on the
display.
Note: There are 5 separate preset buttons on top of the Radio. You can press and hold each button
to store a station. You can also press and hold the number buttons on the remote control to store a
station. (button 0 = preset 10)
Recalling DAB Preset stations
You can quickly select your presets by pressing the Preset button, then rotate the ok knob to scroll
through the stored presets. Short press the ok knob to choose to the selected station.
If you choose an empty preset, then "Preset empty" will be displayed.
To quickly select preset 1 till 5, you can short press the buttons 1 – 5 on top of the radio but it's also
possible to press the numbers 0-9 on the remote control to select a preset (where 0 = preset 10)
Alarm Setting
Note: Check that the radio has the correct time and date before you set an alarm.
In DAB or FM mode:
Press the 'Alarm' button on the front of the radio, 'Alarm 1 off 6:00' is displayed. Short press the ok
knob.
'Alarm 1 info' is displayed. Rotate the ok knob to "Alarm" and short press the ok knob to switch the
alarm on- or off.
Rotate the ok knob to scroll to 'frequency'. You can choose Daily, Once, Weekends or Weekdays.
Short press the ok knob to confirm you selection
Rotate the ok knob to scroll to 'Wake Up Time' and short press the ok knob. The Hour digits will start
to flash.
Rotate the ok knob to set the desired hour and then short press the ok knob to confirm.
The minute digits will start to flash.
Rotate the ok knob to set the minutes and short press the ok knob to confirm.
15