LENCO DAR-030BK Mode D'emploi page 11

DAB Mode- DRC
DRC is dynamic range compression, and it is about increasing the loudness of the quieter parts of
the audio signal, and decreasing the loudness of the louder parts.
In DAB mode, press the Menu button, then use the ok knob to navigate until "DRC" is highlighted.
Press the ok knob to confirm.
Now use the ok knob to cycle through off, high, low level. Press the ok knob to confirm your choice
DAB Mode- display mode
This function will display various information about the current station.
Press the ok knob repeatedly to scroll through the following information:
DLS (dynamic label segment)/ Radio text- The radio station may include a scrolling message about
the current program.
Ensemble/Multiplex (Group name): The ensemble/multiplex is a group of stations that are bundled
and transmitted together in one single frequency. There are national and local multiplexes, local
ones contain stations that are specific to the local area.
Frequency: The display will show the frequency of the station being broadcast.
Signal strength: The display will show a slide bar to indicate the strength of the signal. The stronger
the signal, the longer the bar.
Signal error: This is displayed as number between 0-99. It would not be possible to satisfactorily
listen to a radio station with a signal error rate of 30 or above.
Audio bit rate: The display will show the digital audio bit rate being received.
Time and date: the time and date will be automatically updated by the radio.
DAB mode- System settings
Equalizer: Rotate the ok knob to choose between -Normal-Classic-Jazz-Pop-Rock-Speech, My EQ, My
EQ set up(Treble, Bass)
11