Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Symptom
Sound cannot be heard from the speakers.
"MISWIRING CHK WIRING THEN RESET
UNIT" / "WARNING CHK WIRING THEN
RESET UNIT" appears on the display and no
operations can be done.
The unit does not work at all.
"F-AUX" or "R-AUX" cannot be selected.
Sound is sometimes interrupted while
listening to an external component
connected to the auxiliary input jack.
SSM automatic presetting does not work.
Static noise while listening to the radio.
"AM" cannot be selected.
Disc cannot be played back.
CD-R/CD-RW cannot be played back and
track cannot be skipped.
Disc sound is sometimes interrupted.
"NO DISC" appears on the display.
"PLEASE" and "EJECT" appear alternately
on the display.
"IN DISC" appears on the display.
Disc cannot be played back.
Noise is generated.
"READING" keeps flashing on the display.
Tracks do not play back in the order you
have intended them to play.
The elapsed playing time is not correct.
The correct characters are not displayed
(e.g. album name).
Remedy/Cause
Adjust the volume to the optimum level. / Make sure the unit is
not muted/paused. (page 6) / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered
with insulating tape properly, then reset the unit. (page 3)
If the message does not disappear, consult your JVC car audio
dealer or a company supplying kits.
Reset the unit. (page 3)
Check the <SRC SELECT> = <F-AUX / R-AUX> setting.
(page 12)
Check to be sure the recommended stereo mini plug is used for
connection. (page 9)
Store stations manually.
Connect the antenna firmly.
Check the <SRC SELECT> = <AM> setting. (page 12)
Insert the disc correctly.
Insert a finalized CD-R/CD-RW (finalize with the component
which you used for recording).
Stop playback while driving on rough roads. / Change the
disc. / Check the cords and connections.
Insert a playable disc into the loading slot.
Press 0, then insert a disc correctly.
The disc cannot be ejected properly. Make sure nothing is
blocking the loading slot.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Skip to another track or change the disc.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
The playback order is determined when the files are recorded.
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
ENGLISH
13
Publicité
