CASO DESIGN 630 Manuel D'utilisation page 27

Defective components must always be replaced with original
►
replacement parts. Only such parts will guarantee that the
safety requirements are fulfilled.
12.3 Sources of danger
12.3.1 Danger of burns or of explosion
WARNING
There is a danger of burns and explosion due to excess
pressure that is created in the event the device is not used
properly. Observe the following safety notices to avoid dangers
of burns or an an explosion:
Never use the device to store or dry flammable materials.
►
Never clean appliance parts with flammable fluids. The fumes
►
can create a fire hazard or explosion.
Do not store or use gasoline or any other flammable vapours
►
and liquids in the vicinity of this or any other appliance. The
fumes can create a fire hazard or explosion.
Do not damage the cooling circuit .
►
12.3.2 Dangers due to electrical power
DANGER
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or
subassemblies! Observe the following safety notices to avoid
dangers due to electrical power:
Before changing the inner light, turn off the device first and
►
then unplug the device from the wall outlet.
Do not operate this device if it has a damaged cable or plug, if
►
it is not working properly or if it has been damaged or
dropped. If the power cable or plug are damaged, then they
must be replaced by the manufacturer or its service agent in
order to avoid a hazard.
Please note
27