Philips HR2382/16 Mode D'emploi page 9

ENGLISH
10
Problem
Small amount of water
is leaking out from the
appliance.
Unable to make pasta
successfully with the
liquid calculation
function.
E1 displays on the
screen.
The appliance stops
during processing, E2
displays on the screen,
the indicators are
flashing quickly, and
the alarm sounds.
EEE displays on the
screen.
Cause
Water is added before
the program starts.
The required liquid
amount indicated on the
display screen does not
apply to some recipes (for
example cookies, gluten
free pasta).
The shaping disc is not
attached.
The lid is not in place or
not properly attached.
The mixing paddle may
be blocked by some
foreign objects.
The dough may be too
dry.
The wrong program is
selected.
The appliance
malfunctions.
Solution
Follow the user manual instructions
to add water right after the program
starts.
These recipes require you to skip the
liquid calculation part. In this case,
press the Start/pause button for
5 seconds, and the appliance will start
mixing and extruding directly.
Attach the disc holder to the main
unit, attach the shaping disc properly
and fix the front panel properly to the
device.
Attach the lid properly.
Disconnect from the power source,
clean the pasta maker, and follow the
user manual again to restart the pasta
making.
Contact the service center.