Virutex EVOLUTION PEB250 Mode D'emploi page 23

A
B
(Fig. 1)
B
A
(Fig. 2)
(Fig. 3)
A
B
(Fig. 4)
3. STANDARD EQUIPMENT
The box contains the following items:
B
• Manual hot glue edgebander
• Bag containing 250 g of Virutex glue.
• Service keys.
• Hanging ring and chuck, for working with the machine
suspended (Fig. 22-23)
• Reusable wooden box, comes with a metal support to which
the gluing machine can be fastened.
• Operating Instructions
4. OPTIONAL ACCESSORIES
• MEB-250 table for edgebander 5046525
• End cutter+ rollholder RC50T for MEB-250 5046266
• Container of glue (4 kg) 2599266
• Anti-stick silicon free "Cantspray"
• FR156N edge trimmer
• CA56G head
• Pneumatic clamping system, tilting and swivelling SVN460
5046400
• SFV50 5045753 stand with 2 suction pads
• SFV150 5045833 stand with 1 suction pad
• AU93 double edge trimmer (max. 1 mm)
• RC21E end trimmer (max. 1 mm)
• RC221R end trimmer (max. 2 mm)
• RC321S end trimmer (max. 3 mm x25)
B
5. PACKAGING AND TRANSPORT
The machine comes in a wooden box, which should be saved
for subsequent transporting.
A
5.1 UNPACKING
The machine is inside the box and should be removed in the
following way:
• Remove the top cover and keep it in a safe place for later use.
• Unscrew the 3 screws B (Fig. 1) by mean of a screwdriver,
remove them from the box A (keep them for later use).
• Take machine B (Fig. 2) out of the box A (Fig. 2).
PEB250 EVOLUTION - 23