Télécharger Imprimer la page

Dometic CFX40 Notice D'utilisation page 22

Masquer les pouces Voir aussi pour CFX40:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
Troubleshooting
9
Troubleshooting
Fault
Device does not
function, LED does
not glow.
The device does not
cool (plug is inserted,
"POWER" LED is lit).
The device does not
cool (plug is inserted,
"POWER" LED flashes
orange, display is
switched off).
When operating from
the DC outlet:
The ignition is on
and the device is not
working and the LED
is not lit.
22
Possible cause
No voltage was
detected in the
DC power outlet.
No voltage present in
the AC voltage socket.
The device fuse is
defective.
The integrated mains
adapter is defective.
Defective compressor.
Battery monitor is set
too high.
Battery voltage is too
low.
The DC outlet is dirty.
This results in a poor
electrical contact.
The fuse of the DC plug
has blown.
The DC fuse inside the
device has blown.
The vehicle fuse has
blown.
Suggested remedy
In most vehicles the ignition must be
turned on before power will be supplied
to the DC power outlet.
Try using another plug socket.
Replace the device fuse, see chapter
"Replacing the AC fuse" on page 20.
This can only be repaired by an
authorised service agent.
This can only be repaired by an
authorised service agent.
Select a lower battery monitor setting.
Test the battery and charge it as needed.
If the plug of your cooling box becomes
very warm in the DC outlet, either the
DC outlet must be cleaned or the plug
has not been assembled correctly.
Replace the fuse in the DC plug, see
chapter "Replacing the DC plug fuse" on
page 20.
This can only be repaired by an
authorised service agent.
Replace the vehicle's DC outlet fuse.
Please refer to your vehicle's operating
manual.
CFX
EN

Publicité

loading

Ce manuel est également adapté pour:

Cfx28Cfx35Cfx serieCfx50