Publicité
Les langues disponibles
Les langues disponibles
Available accessories
# If you do not operate functions except for
ITS memo and TitleInput "A" within about 30
seconds, the display is automatically returned to
the ordinary display.
Function and operation
Play mode, Random mode, Scan mode,
Pause, Compression and TitleInput "A" op-
erations are basically the same as that of the
built-in CD player.
Function name
Operation
Refer to Selecting a repeat play
range on page 17.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
as below:
Play mode
! M-CD repeat – Repeat all
discs in the multi-CD player
! Track repeat – Repeat just the
current track
! Disc repeat – Repeat the cur-
rent disc
Refer to Playing tracks in random
Random mode
order on page 17.
Refer to Scanning folders and
Scan mode
tracks on page 18.
Refer to Pausing disc playback on
Pause
page 18.
Refer to Using compression and
BMX on page 18.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
Compression
of BMX.
The settings can be switched as
below:
COMP OFF—COMP 1—COMP 2
—COMP OFF—DBE 1—DBE 2
Refer to Using ITS playlists on this
ITS play mode
page.
Refer to Using ITS playlists on this
ITS memo
page.
Refer to Entering disc titles on the
TitleInput "A"
next page.
Notes
! If you select other discs during repeat play,
the repeat play range changes to
M-CD repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Disc repeat.
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to TitleInput "A". The disc title has al-
ready been recorded on a CD TEXT disc.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1
Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2
Use MULTI-CONTROL to select
ITS memo in the function menu.
3
Select the desired track by pushing
MULTI-CONTROL left or right.
4
Push MULTI-CONTROL up to store the
currently playing track in the playlist.
Memory complete is displayed and the cur-
rently playing selection is added to your play-
list.
5
Press BAND to return to the playback
display.
Section
03
59
En
Publicité
