Publicité
Les langues disponibles
Les langues disponibles
Operating this unit
Note
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or in its accompa-
nying documentation. Enter the PIN code refer-
ring to Entering PIN code for Bluetooth wireless
connection on page 47.
Disconnecting a Bluetooth
audio player
1
Use MULTI-CONTROL to select
Disconnect audio in the function menu.
2
Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
Disconnected is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Connecting the most recently
connected Bluetooth audio player
This unit searches for a Bluetooth audio player
in the detectable area. Furthermore, this unit
automatically connects the most recently con-
nected Bluetooth audio player.
1
Use MULTI-CONTROL to select
Connect audio in the function menu.
2
Press MULTI-CONTROL to connect the
Bluetooth audio player.
While connecting, Connecting is displayed.
After the connection is completed, Connected
is displayed.
Playing songs on Bluetooth
audio player
1
Use MULTI-CONTROL to select Play in
the function menu.
2
Press MULTI-CONTROL to start play-
back.
Stopping playback
1
Use MULTI-CONTROL to select Stop in
the function menu.
2
Press MULTI-CONTROL to stop the play-
back.
Playback of the current song stops.
Pausing a song
1
Use MULTI-CONTROL to select Pause in
the function menu.
2
Press MULTI-CONTROL to turn pause
on.
Playback of the current song pauses.
# To turn pause off, press MULTI-CONTROL
again.
Connecting to a Bluetooth
audio player automatically
This unit automatically connects to the Blue-
tooth audio player that was most recently con-
nected to this unit. Note that if you want to
use other devices, automatic connection can-
not be performed.
! This feature is not available if automatic
connection from this unit has been estab-
lished to your cellular phone.
! While you are operating in the function
menu of TEL source or BT Audio source,
automatic connection to your Bluetooth
audio player is not initiated.
1
Use MULTI-CONTROL to select
Auto connect in the function menu.
2
Press MULTI-CONTROL to turn auto-
matic connection on.
# To turn automatic connection off, press
MULTI-CONTROL again.
Section
02
25
En
Publicité
