Publicité
Les langues disponibles
Les langues disponibles
Operating this unit
2
To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
# You can also end the call by pressing
ON HOOK on the remote control.
# You may hear a noise when you disconnect
the phone.
Rejecting an incoming call
You can reject an incoming call. To reject all
incoming calls automatically, refer to Setting
the automatic rejecting on page 38.
% When a call comes in, press PHONE.
The call is rejected.
# You can also reject a call by pressing
ON HOOK on the remote control.
# The rejected call is recorded in missed call
history list. About the missed call history list,
refer to Using the Call History on page 36.
Answering a call waiting
If while you are talking on the phone another
call comes in, the number (or name if it is in
your phone book) of the new caller appears in
the display to signal that you have a call wait-
ing. You can put the first caller on hold while
you answer the call waiting, or you can choose
to reject the call, in which case the number is
logged as a missed call.
! Depending on the cellular phone, this func-
tion cannot be used.
! This unit can only handle three calls simul-
taneously. Therefore, depending on the cel-
lular phone used with this unit, this
function may not be performed correctly.
1
Press MULTI-CONTROL to answer a call
waiting.
# You can also answer a call waiting by pressing
OFF HOOK on the remote control.
# Pressing MULTI-CONTROL switches between
callers on hold.
2
Press PHONE to end all calls.
Pressing PHONE ends all calls including a call
waiting on line.
# You can also end all calls by pressing
ON HOOK on the remote control.
# Except for switching between the calls on line,
you cannot end each call waiting individually.
Pressing PHONE ends all calls.
Rejecting a call waiting
If you would rather not interrupt your current
call to answer a call waiting, you can reject it
and have the number added to the missed call
history list.
% Press PHONE to reject a call waiting.
# You can also reject a call waiting by pressing
ON HOOK on the remote control.
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO, ENTERTAINMENT and
RECEIVING MOVIE appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to change func-
tions.
Turn MULTI-CONTROL to switch between the
functions.
Function names that appear in the display are
different depending on your cellular phone's
connection and registration status.
If not connected yet
Section
02
29
En
Publicité
