Publicité
Les langues disponibles
Les langues disponibles
Section
02
Operating this unit
2
Press DISPLAY to select the desired
character type.
Press DISPLAY repeatedly to switch between
the following character types:
Alphabet (upper case)—Alphabet (lower case)
—Numbers and symbols
3
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
5
After inputting device name, press
MULTI-CONTROL to store in this unit.
# Pushing MULTI-CONTROL right in the confir-
mation display returns you to the device name
input display, and you can change the device
name.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the
beginning, device name cannot be stored in
memory.
Displaying system version for
repair
Should this unit fails to operate properly and
you consult with dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
1
Use MULTI-CONTROL to select
BT Version Info.
The system (microprocessor) version of this
unit is displayed.
2
Push MULTI-CONTROL left to switch to
the version of the Bluetooth module of this
unit.
# Pushing MULTI-CONTROL right returns to the
system version of this unit.
48
En
Resetting the Bluetooth
wireless technology module
Bluetooth telephone and Bluetooth Audio
data can be deleted. To protect personal infor-
mation, we recommend deleting this data be-
fore transferring the unit to other persons. The
following settings will be deleted.
! phone book entries on the Bluetooth tele-
phone
! preset numbers on the Bluetooth tele-
phone
! registration assignment of Bluetooth tele-
phone
! call history of Bluetooth telephone
! history of the most recently connected
Bluetooth audio
1
Use MULTI-CONTROL to select BT reset.
2
Push MULTI-CONTROL right to show a
confirmation display.
Clear memory YES is displayed. Clearing
memory is now on standby.
# If you do not want to reset phone memory,
push MULTI-CONTROL left. The display reverts.
3
Press MULTI-CONTROL to clear the
memory.
Cleared is displayed and the settings are
deleted.
Publicité
