Publicité
Les langues disponibles
Les langues disponibles
Before starting up
Intend use
This device is only intended as an electric tiller for aerating lawns and grassy areas
in private domestic and hobby gardens.
It is not designed for use in public areas, parks, sports areas, and in agriculture and
forestry.
Using the application for any other purpose is considered incorrect and unapproved.
The manufacturer is not liable for any damage or injury resulting from such use. The
user is entirely responsible for any associated risks.
Double insulation
The application has double insulation. This means that all external metal parts are
insulated from the electrical supply.
This is achieved by introducing an insulation layer between electrical and
mechanical parts. The double insulation guarantees you the greatest possible
safety.
Overheat protection
If the application is blocked by a foreign object or if the motor is overloaded, the
motor will switch off automatically by the protection device. Release the trigger level
and wait till the motor cool down (approx. 15 minutes) then start application again.
Assemble (Fig. 1)
Attaching the carrying handle
Insert the carrying handle (37) to bar lower section (34) and fix it by two supplied
screws and nuts.
Upper handlebar
Slide the cable relief (43) onto the upper handlebar.
Connect guide bar by inserting both side the supplied bolts (40) and swing nuts (39).
You can also assemble the handlebar to the bottom holes to adjust the height.
Using supplied two cable clips (38) to hold cable.
24
Publicité
