SOUNDMASTER UR106SW Mode D'emploi page 10

Turning the alarms on or off
When the clock time is displayed, press the
respective alarm. The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio) will switch on
when the alarm is enabled.
Deactivating a sounding alarm
 Press any "ALARM OFF" button to switch off a sounding alarm.
 When the alarm sounds, the corresponding Alarm 1 or Alarm 2 indicator (alarm or radio)
flashes on the display.
Snooze
 To temporarily silence a sounding alarm, press the "SNOOZE" button. The alarm will sound
again when the snooze period (9 minutes) is over.
 The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio) flashes on the display
during the snooze period.
 To cancel the snooze period and the alarm, press any "ALARM OFF" button.
Sleep
 This sleep function defines the duration of time before the radio switches itself off
automatically.
 When the radio is switched on, press the "SLEEP" button repeatedly to select a sleep period
(Options: Off, 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes).
 The radio will automatically switch off when the sleep period is over.
 Press the "SLEEP" button to check the remaining time before the radio switches off.
 Press the " " button to cancel this function.
Display information
 In radio mode, press the
time to the current radio frequency.
Display brightness
 In standby mode, press the "DIMMER" button to change the brightness level of the display
(low level or high level).
" " or "
" " or " "
button once to briefly change the display from the clock
3
UR106 / English Instruction Manual
" button to enable or disable the