Lenze ERBSR Serie Instructions De Montage page 46

4 Technical data
General data and operating conditions
Mounting conditions
Mounting location
Mounting position
Standard
Variant
Free spaces
Standard
Variant
46
The mounting location must comply with the
l
device features mentioned in the chapter "General
data".
l Flammable materials or substances may not be
placed in the vicinity of the brake resistor.
The heat generated by the brake resistor must be
l
dissipated freely.
Vertically suspended with connections at the bottom.
Horizontally standing with fixing bracket at the
bottom. The permanent power P
20 %!
at the top > 200 mm, to the sides > 25 mm, at the
bottom > 100 mm
at the top > 200 mm, to the sides > 45 mm
l
is to be reduced by
d
EDKRBS470R DE/EN/FR 10.0