GYS ALIEN+ TRUE COLOR XXL Notice Originale page 7

Translation of the original instructions
The welding mask must be moved carefully to avoid damage to the
filter, guards and/or protective shell.
Maintenance :
- Do not place heavy objects or tools on or in the facepiece to
avoid damage to the filter or face shields.
Mask storage temperatures range from -10°C to +60°C.
- Clean the Optoelectronic Filter with a clean cotton or special
lens cloth.
- Regularly clean and change the guard screens.
- Clean the inside and outside of the mask with a neutral
detergent-disinfectant. Do not use solvents.
- Make sure that the sensors and cell are not obstructed by dust or
debris.
- We recommend using the mask and visors for 5 years. The length
of use depends on various factors such as type of use, cleaning,
storage and maintenance.
BEFORE WELDING
-Check that the welding helmet is in good condition and headband adjustment.
-Check whether the front cover lens, the front frame and filter are inserted and fixed in place. In case of anomalie, please proceed to
its reconditionning.
-Make sure that the 2 sensors (4) and the cell (2) are not obstructed by dust or debris.
-Make sure that the protection films on both screens are removed.
-Check that the protection level matches your welding processes. Please
refer to the following chart to help your choice (cf. welding process board)
OPERATION
The ALIEN+ TRUE COLOR XXL auto-darkening welding helmet switches from light to dark state when a welding arc is struck. The
auto-darkening welding helmet switches back to the light state when the arc stops.
1 2 3 4
5
10
PRECAUTIONS
• The welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas
welding.
• Standard protective screens must be installed on both inside and outside surfaces of the module. Failure to use protective screens
may constitute a safety hazard or result in irreparable damage to the module.
ALIEN+ TRUE COLOR XXL
1. Sensitivity control knob
2. Delay time control knob
6
3. Shade adjustment 5-9/9-13
4. Low battery alarm
5. LCD protection plate
7 6. Solar cell
7. Sensors
8
8. Filter
6
9
9. Potentionmeter «Welding-Grinding»
10. Pile lithium 3V (x2) CR2032
Clear shade 3
Dark shade 5-9 / 9-13
Filter dimension
114 x 133 x 9 mm
Reaction speed
0,08 ms
Power supply
solar + battery
Weight 560 g
Field of vision 100 x 93 mm
Applications MMA 5>400 A / TIG 2>300 A / MIG-MAG 5>400 A / GRIND
Warranty 2 years
Application temperature -5°C / + 55°C
Storage temperature -10°C / + 60°C
7
EN