Before beginning installation, carefully read these instructions. This will simplify the
installation and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation for future reference.
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70.
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
· Do not try to light any appliance.
· Do not touch any electrical switch; do not
use any phone in your building.
· Clear the room, building or area of all
occupants.
· Immediately call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
· If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
All manuals and user guides at all-guides.com
Full Size Tumble Action Washers
Installation
Instructions
Contents
SUBJECT
Pre-Installation Requirements
Electrical Requirements
Grounding Requirements
Water Supply Requirements
Drain Requirements
Rough-In Dimensions
Location Of Your Washer
Unpacking
Installation
Replacement Parts
PAGE
2
2
2
2
2
3
4
4
5-6
6
P/N 134678000 (0512)