Publicité
Les langues disponibles
Les langues disponibles
• The helmet is designed to absorb the energy
of a blow or a collision by destroying some
of its components. In case of a further blow
it wouldn't protect you any longer. After an
accident, the helmet must be replaced even
though it doesn't show external damages.
• Refrain from transporting your helmet by
hanging it onto any part of your motorcycle.
Keep it away from exhaust pipes and other
sources of heat.
• Never clean the helmet with solvents contain-
ing petroleum or scouring agents, neither the
outside nor the inside.
Always use pH-neutral detergent dissolved
in clean water. Careful rub with a soft cloth.
Then wipe dry with a lint-free cloth.
The pad may be cleaned with a little soap
using a soft brush.
• Only use genuine spare parts for your helmet.
• Only use the sun shield in daylight! Never use
at twilight or at night.
Product Characteristics
ECE-R 22.05 Homologa-
tion
This helmet is in compliance with
ECE-R 22.05 standards and
is homologised accordingly.
The ECE-R 22.05 standard consists of uniform
conditions for the approval of protective hel-
mets and its visors for drivers and passengers of
motorcycles and mopeds. The basic principles
for these tests are the so called ECE-Regulations
of the Economic Commission for Europe.
Significant Tests of the
ECE-Regulation 22.05
• Shock absorbance
• Dynamic test of wear features
• Field of vision test
• Design strength
• Sustainability test (Strip-off test)
• Chin straps and lock test
• Shear test for outside edges
• Friction performance test of the outer shell
• Visor test
(mechanical and visual characteristics)
• Chin bar, chin part damping test
Voluntary product testing
certificate
The TÜV Rheinland emission certificate indi-
cates products tested for contaminants and
according to current knowledge pose no risks
to the health.
Inside Padding with Coolmax
Inserts
Coolmax
high-performance fabric fibre
that supports its wearers during sport activities.
Based on the patented DuPont-fibre technology,
Coolmax
transports moisture from the body to
®
the fabric surface where it dries quicker than
with any other fabric.
The specially developed fibres of INVISTA that
are used for Coolmax
®
moisture away from the body to the surface of
the fabric where it has the opportunity to evap-
orate quickly. At the same time, the uniquely
formed fibres offer maximum breathing activity,
even in wet conditions. In addition, the breath-
ing activity improves the heat regulating effect.
Cheeks, forehead and neck pads of this article
are equipped with Coolmax
HeiQ
Fresh Tech
®
HeiQ
Experience the feeling of
lasting freshness through the power of silver,
keeping you odour-free all day long.
The helmet liner contains a biocide agent
(HeiQ
Fresh Tech) for an anti-bacterial,
®
odour-inhibiting lining treatment. Active ingredi-
ent: silver adsorbed to silicon dioxide (nano).
Breath deflector and visor ventila-
tion
The breath deflector (7)
de creases fogging of the visor
due to exhaled air. Addition-
ally, the air circulation in the
visor area is improved.
Emission
®
by INVISTA is a
®
-fabrics transport the
.
®
Textile freshness
®
GB
29
Publicité
