Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT! Any installation operation shall be carried out by a suitably trained
staff, following carefully the information given in this manual.
Check the packaging at the reception of the goods and store only at a dry place. Verify that the device
has not been damaged during transport or storage operations. Make sure you receive all the compo-
nents. Ask the manufacturer for any possible missing component.
The hose reel has to be wall mounted at a minimum height from the floor of 2.50 m in order to
prevent accidents during work operations. Considering the hose reel weight and dimensions, its
movement requires the use of lifter devices.In particular cases it is possible to mount it on the floor or on
other machines as accessory, only if complete with a fixed support. The hose-guide arms can be fixed
in three different positions according to the hose reel installation (see pictures A-B-C p.28). Mount the
hose reel in fixed position or with revolving stand (optional) on stiff and consistent walls using 4 dowels
of 10 mm diameter (see picture p.28).
WARNING! The manufacturer declines any responsibility for injuries to people or damages to
things caused by a wrong assembly of the hose reel.
WARNING: Risk of explosion!
Do not lubricate the swivel joints and the seals for Oxigen and Acetylene with oil and
grease. Use lubricant (BAM) approved only.
Connect the hose reel to the line by the clamps in dotation, respecting the colours: RED FOR
GAS and LIGHT BLUE FOR OXIGEN.
Fit some safety valves IN CONFORMITY WITH THE "EN 730" (BS EN 730) RULE on the piping net-
work, before the connection to the swivel joints and to the end of the hose (on the blowpipe), to prevent
a back-fire and a back-gas. According to the rules, put a ball-tap on the feeding line of the hose reel in
order to make the maintenance operations easier and as a safety valve for dangerous situations.
8 - INSTALLATION
9 - LINK
- 11 -
Publicité
