Garland BULK KEEPER 40V 314 Manuel D'instructions page 48

English
9. TROUBLE SHOOTING
Depending on the symptons that you may observe, you will be able to know the probable cause of the problem
and how to solve the problem.
Problem
The engine stops when started
The chain does not move
Poor cutting performance
Chain heats up
Cause
The battery is not connected
properly
Chain brake activated
The battery is discharged
Brushes worn out
Chain brake activated
Chain not sharp enough
Chain tension
Bad chain lubrication
48/152
Action
Connect the battery
Check chain brake and remove if
necessary.
Charge the battery
Send machine to after sales service.
Check chain brake and remove if
necessary.
Sharpen chain.
Tense the chain.
Check oil level and refill if necessary.