Garland BULK KEEPER 40V 314 Manuel D'instructions page 47

8.3.2. PIÑÓN DE ARRASTRE
El piñón de arrastre está sometido a un desgaste alto.
Revise el piñón de arrastre y si detecta marcas de
desgaste profundas o pérdida de material en algún
diente envíe su máquina al servicio técnico para su
sustitución.
8.3. PERIODIC MAINTENANCE
Do periodic maintenance inspections on the
machine to guarantee an efficient use of the machine.
For a complete check up, we highly recommend that
you take the machine to your after sales service.
Maintain the machine clean, specially the ventilating
areas of the engine.
Before carrying out any maintenance work, make sure
that the machine is not switched to the mains.
Always use original spare parts so as to guarantee
the best possible performance of the machine and
so as to avoid dangers and risks to the user and the
machine. These spare parts should be bought at the
after sales service.
The use of non original spare parts can cause
accidents, personal damage to the user and breakage
of the machine.
8.3.1. MAINTENANCE OF THE BAR
Turn the bar regularly
so that it does not only
wear out from one end.
The guide of the bar
must always be in perfect
conditions. Verify that
it maintains the same
thickness in all the
bar. Replace the bar if
necessary.
Check that there no fissures and tha the level of
looseness is not big. If looseness is big or it has some
fissure, change the bar.
When you unmount the bar, remove any wood
splinters or shavings near the lubrication hole and on
the guide of the bar.
8.3.2. PINION DRAG
The pinion has a high level of wear. Check the pinion
periodically and if you detect wear or loss of material,
do not hesitate to take the machine to your after sales
service.
47/152
English