Oven Lights; Oven Door - Jenn-Air JJW8330DDS Instructions D'installation Et Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Oven Lights

The oven lights are standard 40-watt appliance bulbs. They will
come on when the oven door is opened. They will not work
during the Self-Cleaning cycle. When the oven door is closed,
press OVEN LIGHT to turn them on or off.
To Replace:
Before replacing, make sure the oven is off and cool.
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Reconnect power.
14

Oven Door

For normal oven use, it is not suggested to remove the oven door.
However, if removal is necessary, make sure the oven is off and
cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open oven door to the full open position.
2. Locate the oven door latches in both corners of the oven
door.
3. Using a Phillips screwdriver, remove the screw and door
hinge cover plate above each door latch slot in the oven
frame.
A. Hinge cover plate screw
B. Hinge cover plate
C. Hinge
4. Grasp the edges of the oven door with both hands and close
the oven door halfway. Lift and pull oven door toward you and
remove. Set the oven door aside on a covered surface.
To Replace:
1. Grasp door at each side.
2. Align and insert ends of hinges into hinge slots in the oven
frame.
3. Push hinges in as far as they will go and open the oven door
to the full open position. You should feel the oven door drop
into place.
4. Using a Phillips screwdriver, reinstall the hinge cover plates
with a screw on each side of the oven door frame.
5. Close and open the oven door to check that the door closes
and opens completely.
A
B
C

Publicité

Table des Matières
loading

Table des Matières