ETNA KIF670ZT Mode D'emploi page 45

OPERATION
2. Simultaneously touch the '-' and '+' timer keys.
▷ The illuminated point next to the display is turned off.
Switch on the Automatic heat-up function
1. Switch on the hob and place a suitable pan on one of the cookings zones.
The cooking zone should be off.
▷
A zero (0) should appears in the display.
▷
2. Set power level '9'. Touch and hold the '+' key for approximately 3 seconds until you hear a
short acoustic signal.
'A' and level '9' flash alternately in the display.
▷
3. Touch the '-' key to set the power level you wish to cook with after the power setting with
automatic heat-up time is finished.
▷ After 3 seconds releasing the key the automatic heat-up functions is activated.
'A' and the selected power flash alternately in the display.
▷
4. When the automatic heat-up time expires, the cooking zone automatically switches to the
selected power.
▷ The selected power will appear continuously in the display.
5. Touch the '-' key to switch off the active automatic heat-up function or simultaneously touch
the '-' and '+' keys to switch off the cooking zone.
▷ Touch the '+' key to increase the automatic heat-up function.
Pause cooking
1. Touch the pause key.
The light above the pause key is flashing (together with the power settings).
▷
2. Touch the pause key again to turn off the pause function.
The hob will automatically switch off after 10 minutes if the pause function is not
▷
switched off in the meantime.
Using the (child) lock function
1. Switch off the hob.
2. Touch and hold the On/Off key for approximately 3 seconds.
All displays show 'L'.
▷
EN 19