Publicité
Les langues disponibles
Les langues disponibles
THE COLDEST PART OF THE REFRIGERATOR
In pulsed air refrigerators (equipped with a fan) or No Frost models, the coldest area symbol is not shown
because the temperature is uniform throughout the interior.
INSTALLING THE TEMPERATURE INDICATOR
To help you adjust your refrigerator correctly, it is equipped with a temperature indicator that you can use to control
the average temperature in the coldest area.
WARNING: This indicator is only intended for use in your refrigerator. Do not use it in another refrigerator (as the coldest area
will not be the same) or for any other purpose.
TEMPERATURE INDICATOR: THE COLDEST PART OF YOUR REFRIGERATOR
CHECKING THE TEMPERATURE IN THE COLDEST AREA
• Using the temperature indicator, you should regularly check that the temperature is
correct in the coldest part of your refrigerator. The temperature inside your refrigerator depends on
a number of factors, such as the outside room temperature, how full your refrigerator is, and how
often you open the door. Take these factors into consideration when adjusting your appliance.
When the indicator shows "OK", it means your thermostat is set properly and the temperature inside your
refrigerator is correct.
If the indicator is white it means the temperature is too high, so you should
increase the thermostat and wait for 12 hours before checking the indicator
again.
After loading the refrigerator or opening the door, the indicator may turn
white for a few seconds.
The symbol indicates the location of the coldest part of your
refrigerator. This area is in between the vegetable compartment at
the bottom and the symbol at the top, or the shelf at the same height.
In order to maintain the temperature in this area, make sure not to
change the position of this shelf.
OK
Correct setting
GB-19
Temperature too
high – adjust the
thermostat
Publicité
