Publicité
Les langues disponibles
Les langues disponibles
7. Wipe off any drops of water with
a dry cloth.
8. Dry the outer foil section and the
shaver completely in a shaded area.
9. Attach the outer foil section to the shaver.
Replacing the system outer foil and the inner
blades
system outer foil
inner blades
Removing the outer foil section
Press the foil frame release buttons
and lift the outer foil section upwards.
Attaching the outer foil section
After turning the water inlet surface to the
front, securely attach the outer foil section to
the shaver until it clicks.
PB013084 - ES-SL33_
(01EN)_05-19-16.indd 13
8
once every year
once every two years
2
1
Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
2. Align the front side of the foil
frame with the system outer foil
mark ( ) and insert them firmly
together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to the
foil frame when attaching to the shaver.
Replacing the inner blades
1. Remove the inner blades one at a
time.
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
2. Insert the inner blades one at a
time until they click.
Replacement parts
Replacement parts are available at your dealer or Service
Center.
System outer foil
Replacement parts for
Inner blades
ES - SL33
System outer foil
and inner blades
1
2
1
2
WES9087
WES9068
WES9013
13
2016/5/19 17:34:15
Publicité
