Notes
The appliance may not operate in an ambient temperature
lower than approximately 0 °C (32 °F).
Before shaving, check that the cleaning shutter is closed.
Do not place your fingers on the power switch while using
the shaver. This may cause the shaver to turn off.
Do not use shaving creams or face cleansers containing
scrubbing compounds as these may cause the outer foil to
clog.
Using the trimmer
Slide the trimmer handle up to open
the trimmer. Place the trimmer at a
right angle (90 degree) to your skin
and move downwards to trim your
sideburns.
Cleaning the shaver
1. Remove the shaver from the
AC adaptor.
2. Apply some hand soap and
some water to the outer foil.
Close the cleaning shutter.
3. Turn the shaver on.
12
PB013084 - ES-SL33_
(01EN)_05-19-16.indd 12
To remove light dirt
4. Slide the cleaning
shutter until it clicks.
5. Clean the outer foil
section with running
water.
6. Turn the shaver off.
Rinse with water and
shake up and down
several times to remove
the water.
Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
For heavy dirt
4. Turn the shaver off
after 10 - 20 seconds.
5. Remove the outer foil
section and turn the
shaver on.
6. Clean the shaver and
the outer foil section
with running water.
Rinse with water and
shake up and down
several times to remove
the water.
2016/5/19 17:34:13