Siemens TK 911N2 Notice D'utilisation page 23

Info: After it has cooled down, immediately
clean the nozzle 10. Dried residues are
diffi cult to remove. See section "Care and
daily cleaning".
Changing basic settings
The basic settings can be changed. To
enable this function, buttons
(small cup), (large cup),
e f
and (steam) are assigned additional
h
functions.
Button = Access to programming mode
h
Button = Selector button
g
for basic settings
Button = Selector button +
f
(in the basic settings)
Button = Selector button –
e
(in the basic settings)
Button = Score settings
a
The following basic settings can be
changed:
– Language
– Water hardness
– Power save
To program the appliance
Info: The appliance must be switched on.
● Keep steam button
least three seconds.
The programming mode is activated.
● By pressing the selector button
choose the desired setting in the display,
e.g.
Hardness/Level 3
● To change the setting, press button
or button + 4, e.g.
f
.
Level 2
● Press button once.
a
The changed setting is stored.
The display once again shows
All manuals and user guides at all-guides.com
(Stand by),
a
(hot water)
g
– Warming plate
– Rinse
– Reset
depressed for at
h
,
g
.
- 2
e
Hardness/
.
Ready
To change the language
Sprache/Deutsch
The following languages are available:
Deutsch Nederlands
English Español
Français Português
Italiano Русский
To change the water hardness
Hardness/Level 3
The following levels are available:
Level 1, 2, 3, 4 or –.
The setting – indicates that no water
hardness level is selected, which means
that the appliance does not automatically
alert the user when descaling is required.
Level Water hardness level
German (°dH) French (°fH)
– none
1 1-7
2 8-15
3 16-23
4 24-30
Power save
The economy mode can be changed from
to
Power save/On
Warming plate
The function of the warming plate 3 can
be switched from
Warmplate/On
.
Warmplate/Off
Descaling procedure
The functions
Start descaling
and
procedure Descaling alarm
are required if descaling is to be
reset
performed, see section "Descaling".
Rinsing
The user can choose between two settings.
= appliance is rinsed
Automatic
automatically.
en
is preset.
is preset.
none
1-13
14-27
28-42
43-54
.
Power save/Off
to
19