Publicité
Les langues disponibles
Les langues disponibles
¡ With multi-circuit hotplates, the heating of the inner
filament circuits and the heating of the activations
may switch on and off at different times.
– This protects easily damaged components from
overheating.
– The appliance is protected against electrical
overload.
– Better cooking results are achieved.
Twist Pad with twist knob
5 Twist Pad with twist knob
The twist pad is the area in which you can use the twist
knob to select the hotplates and heat settings. The
twist knob is magnetic. When positioned in the twist
pad area, the twist knob automatically centres itself
there.
Always keep the twist knob clean. Soiling may impair
its function.
5.1 Using the twist knob
To activate a hotplate, touch the twist knob in the
1.
area of the marking.
To select a heat setting, turn the twist knob.
2.
5.2 Removing the twist knob
You can remove the twist knob in order to clean the
hob or to avoid activating it accidentally.
If you remove the twist knob when the appliance is
switched on, the wipe protection function is activated.
The control panel is locked. You can clean the control
panel.
Wipe protection is active for 35 seconds. If you do not
fit and turn the twist knob during this time, the appli-
ance will switch off.
The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
WARNING ‒ Risk of burns!
If you place a metal object on the twistpad, the hob
can continue heating up.
Always switch off the hob using the main switch.
▶
4.5 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
Display
Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
5.3 Storing the twist knob
Follow these instructions whenever you remove the
twist knob from the hob and store it elsewhere.
WARNING ‒ Danger: Magnetism!
The twist knob is magnetic and may affect electronic
implants, e.g. heart pacemakers or insulin pumps.
People with electromagnetic implants should never
▶
carry this control element around in their pockets.
The minimum distance from pacemakers should be
▶
10 cm.
ATTENTION!
Metal particles adhering to the magnetic underside can
scratch the glass ceramic surface.
Keep the twist knob clean
▶
Remove all metal particles on the underside.
▶
The magnet in the twist knob can affect other appli-
ances and irreparably damage magnetic data carriers.
Keep the twist knob away from magnetic data carri-
▶
ers, e.g. video cassettes, diskettes, credit cards or
cards with magnetic strips.
Keep the twist knob away from television sets and
▶
monitors.
5.4 Operation without using the twist knob
If you have mislaid the twist knob, you can also operate
the hob without it. You can select hotplates and heat
settings.
Switch on the hob using the main switch.
1.
Simultaneously press and hold
2.
4 seconds.
a An audible signal sounds.
Repeatedly press
3.
quired hotplate lights up.
Use
(-) and
(+) to select the heat setting re-
4.
quired.
a The hotplate is switched on.
a You can put the twist knob back on the twistpad at
any time.
Twist Pad with twist knob en
and
for
until the indicator for the re-
37
Publicité
