Publicité
Les langues disponibles
Les langues disponibles
Disclaimers
Modifications to Master Products machines are prohibited without the manufacturer's approval. Following
unauthorised modification, the manufacturer declines any responsibility and cancels the warranty rights for the
machines to which modifications have been made. The manufacturer will not be responsible for any failures and
accidents that may result.
During the warranty period, Master Products machines must only be disassembled and repaired by the
manufacturer's technical staff or official representatives.
The operator who uses the machine must ensure that the crushed material is removed regularly, since the residues
can cause an obstruction and, therefore, a malfunction of the machine.
Transport
IMPORTANT: Remember that the MT Standard 75 model must be transported by two people due to its weight.
Electrical connection
The MT Standard 50/75 machine must be connected to a single-phase 230 V/50-60 Hz electrical power supply.
Placement
The MT Standard 50 and 75 machines must be placed on a flat surface without irregularities, ensuring their stability
and a good working position for the user. It is only suitable for indoor use and under no circumstances should the
electrical part be exposed to water and/or humidity.
21
MT Standard 50: Caja 58 x 58 x 43 cm = 23 kg // Peso neto equipo = 21 kg
MT Standard 75: Caja 85 x 81 x 44 cm = 52 kg // Peso neto equipo = 48 kg
www.masterproducts.es
Publicité
