Bosch KIN 86AF30 Notice D'utilisation page 30

en Installation and connection
Before using your appliance
for the first time
Remove leaflets, adhesive tape and
1.
protective film.
Clean the appliance.
2.
~ "Cleaning" on page 39
Electrical connection
Caution!
Do not connect the appliance to
electronic energy saver plugs.
You can connect the appliance
Note:
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications. Isolated
applications, e.g. on ships or in
mountain lodges, which are not
connected directly to the national grid.
After installing the appliance, wait at
1.
least 1 hour before connecting it to
prevent damaging the compressor.
Connect the appliance via a
2.
correctly installed socket.
The socket must comply with the
following data:
Socket with
Conductor
Fuse
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply.
Appliance specifications are on the
rating plate.
Connect the appliance to a socket
3.
near the appliance.
The socket must be freely
accessible even after the appliance
has been installed.
30
220 V ... 240 V
50 Hz
10 A ... 16 A
*
Getting to know your
appliance
Fold out the last page with the
diagrams. The appliance and diagrams
may differ according to features.
Appliance
~ Fig. !
* Not all models.
Refrigerator compartment
#
Freezer compartment
+
(-h Controls
Lighting
)"
Extendable shelf
)*
Vegetable container with
)2
humidity control
Rating plate
):
Berry tray
)B*
Freezer calendar
)J
Frozen food container
)R
Butter and cheese
)Z
compartment
Storage compartment Vario
)b*
Tray for large bottles
)j