Publicité
Les langues disponibles
Les langues disponibles
MD300W512
Guidance and Manufacturer's declaration – electromagnetic immunity –For Wrist Pulse Oximeter
The MD300W512 Wrist Pulse Oximeter is intended for use in the electromagnetic environment specified below.The customer
or the user of the MD300W512 Wrist Pulse Oximeter should assure that it is used in such an environment.
IEC 60601
Immunity test
test level
3 Vrms
Conducted RF
150 kHz
IEC 61000-4-6
to 80
MHz
3 V/m
Radiated RF
80 MHz
IEC 61000-4-3
to 2.5
GHz
All manuals and user guides at all-guides.com
that is not LIFE-SUPPORTING
Guidance and Manufacturer's declaration - electromagnetic immunity
Compliance
Level
Portable and mobile RF communications equipment should be used no
closer to any part of the MD300W512 Wrist Pulse Oximeter, including cables,
than the recommended separation distance calculated from the equation
applicable to the frequency of the transmitter.
3 Vrms
Recommended separation distance
Where P is the maximum output power rating of the transmitter in watts
(W) according to the transmitter manufacturer and d is the recommended
separation distance in meters (m).
Field strengths from fixed RF transmitters, as determined by an
3 V/m
electromagnetic site survey
each frequency range.
Interference may occur in the vicinity of equipment marked with following
symbol:
Electromagnetic Environment – guidance
80 MHz to 800 MHz
800 MHz to 2.5 GHz
a
, should be less than the compliance level in
b
31
Wrist Pulse Oximeter
Publicité
