Publicité
Les langues disponibles
Les langues disponibles
MD300W512
2 GENERAL DESCRIPTIONS
The wrist pulse oximeter adopts OLED screen, which can display the SpO
2.1 Appearance
Description of Fig.2-1:
1. The probe socket: to connect SpO
2. Displaying screen.
3. Power button: press and hold the button for 3 seconds to power the device on. Press and hold the button for 4 seconds to
turn off the device. In the setting menu, short press the button to confirm the item.
4. Function button: in the measuring mode, short press the button to see the data and time; long press the button to enter into
the setting menu; in the setting menu, short press the button to choose the item.
5. The speaker.
2.2 Power Installation
1. Open the battery cover, as shown in the following picture.
All manuals and user guides at all-guides.com
probe for measurement and connect USB cable for data transmission.
2
and PR value, pulse bar and other indications.
2
Fig.2-1
7
Wrist Pulse Oximeter
Publicité
