Publicité
Les langues disponibles
Les langues disponibles
MD300W512
Wrist Pulse Oximeter
All manuals and user guides at all-guides.com
5 SETTINGS
Firstly, power the device on, then you can enter the menu setting interface by long press the function button. In the menu setting
interface, there are four submenu—Infor, Bright, Setting and return.
About Infor submenu:
Choose infor submenu, you can see information about the quantity of batteries and the residue store hours;
About Bright submenu:
Choose bright submenu, you can set the level of brightness, There are 5 levels; the default level is 3;
About Setting submenu:
1. Finger out: set the audio indication time of the finger out, there are three modes, off, 1min, 3min.
2. Disp off: set the time of backlight automatically turn down, there are three modes, 10s, 30s, 60s.
3. Save time : set the interval time between two measured results. there are two modes, 2s, 4s.
4. SpO2 beat: 1-Beat; 2-Beat; 4-Beat; 8-Beat; 16-Beat.
5. HR beat: 1-Beat; 2-Beat; 4-Beat; 8-Beat; 16-Beat.
6. ID: set the ID NO. for the users. there are ten ID NO, 1~10.
7. Return: back to the measurement interface.
You can view a menu setting each time you press the function key. If you want to change a setting, please follow the below
steps:
1. Long press the function button to enter the menu setting interface.
2. Select the menu item that you want to set by pressing the function button, and keep the device stayed at the menu item
interface.
3. You can change this menu setting or adjust the current value by pressing the function button, by pressing the power button to
confirm your setting.
The device may back to the measurement interface after several seconds if no operation is carried out.
Date and Time Setting
16
Publicité
