LG S4UQ12JARJB Manuel Du Propriétaire page 25

Using the Generator Mode
Function (Optional)
This function operate air conditioner under the
previously set power consumption.
1
Turn the appliance on.
2
Press GEN MODE button.
or is displayed on some indoor
•
units.
NOTE
• It is not displayed on the remote control
display.
• This function is available with Cooling Mode.
• This function is disabled when you press
MODE or JET MODE button.
• When using Generator Power Supply, air
conditioner must use 'Gen Mode'.(It may not
operate properly in Normal Mode.)
• When using Generator Power Supply, If there
are many applications being used together,
air-conditioner may not operate properly for
overload on Generator.
• Generator should be maintained properly
according to Manufacture's Manual. Non-
properly maintained Generator may cause
unexpected effect on air-conditioner. (Engine
Oil, Fuel Level and continuous usage time
should be in Manufacturer recommended
condition.)
• Due to 'Gen Mode', inadequate cooling
capacity.
• 'Gen Mode' is memorized. (In case of
restarting the Air-Conditioner during 'Gen
Mode'. It operates 'Gen Mode' automatically.)
• When using Generator Power Source,
Outdoor Unit may operate the outdoor fan
Automatically for protecting the Air-
Conditioner.
EN
25