Button Function - Franke FME 407 XS Mode D'emploi Et Installation

USE

Button Function

L Turns the lights ON/OFF at maximum intensity.
Press and hold the button for approximately 4
seconds, with all the loads turned off (Motor and
Lights), to turn the Activated Charcoal Filter
alarm on/off.
T1 Turns the motor on/off at speed one.
Press and hold the button for approximately 2
seconds, with all the loads turned off (Motor and
Lights), to reset the Activated Charcoal Filter
alarm.
Signals the Metal Grease Filter saturation alarm,
S1
indicating that it is necessary to wash the filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
When this is activated, it signals the Activated
Charcoal Filter saturation alarm, indicating that
the filter must be changed; the Metal Grease
Filters must also be washed. The Activated
Charcoal Filter saturation alarm comes into
operation after the Hood has been working for
200 hours.
EN
Control panel
S1
L T1
Led
-
LED S1 flashes twice = alarm
ON.
LED S1 flashes once = alarm
OFF.
-
LED S1 turns OFF (Fixed or
Flashing).
Fixed
Flashing
1 14