Function Descriptions - Eneo VMC-6.4LCD-P1 Mode D'emploi

3. Function Descriptions

3.1 Coulour Monitor VMC-6.4LCD-P1
Front view
Side view
1
Display
2
MODE
3
4
POWER
5
LED
6
OFF/ON
7
DC IN
8
AV
9 AV
10
Speaker
2+3
Fixed Settings
MODE
2
6 7
Remove protection foil after installation.
Selection of settings: CONTRAST, BRIGHTNESS, HUE, SATURATION, SHARPNESS,
MIRROR SETTING and VOLUME.
Change of settings. Values can be increased or decreased. Selection of AV or AV
ON/OFF switch
Turns green if the monitor is switched on.
Turns off if no input receives a signal. (Power save mode)
ON/OFF switch
Power supply VDC / 500mA
The jack 8 (AV) and 9 (AV) are audio and video inputs.
Two cables with cinch connectors (white = audio, yellow = video) are supplied.
At the rear side of the monitor.
The settings (contrast, brightness, colour, saturation, sharpness, mirror. volume and
the position of the display on the screen) can be adjusted and stored.
To reset all settings: Switch off the monitor (Main Power: Off), press MODE and
simutaneously and power on the monitor.
1
POWER
3 4 5
8 9