Unpacking And Assembling; Unpacking; Assembly - Dirt Devil Centrixx TS Mode D'emploi

2

Unpacking and assembling

2.1 Unpacking

2.2 Assembly

2
1
3
Fig. 2
1
3
2
Fig. 3
Unpacking and assembling
1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible
damages. Information regarding the scope of delivery
Page 24, "Overview of your Centrixx TS".
ATTENTION:
Always transport/send the appliance in its original
packaging to avoid transport damages. Keep the
packaging for such an event.
Dispose of no longer needed packaging material
according to the applicable regulations of your country.
NOTE:
Immediately contact your dealer if you have found
damage resulting from transport.
WARNING:
Danger of injury! Only assemble the appliance when it is
not connected to the mains. Otherwise, the appliance
could be switched on by accident.
1. Push the end of the suction hose (Fig. 2/1) into the
socket opening (Fig. 2/2) of the cylinder vacuum
cleaner until the lock audibly clicks into place. Make
sure that the release button (Fig. 2/3) points down as
illustrated.
4
2. Insert the handle (Fig. 3/1) into the upper end of the
telescopic tube (Fig. 3/2).
3. Attach the floor nozzle (Fig. 3/3) to the bottom end of
the telescopic tube (Fig. 3/4).
NOTE:
When attaching the floor nozzle, you might have to push
a bit harder.
29