Jaga STRADA HYBRID TPT Manuel D'installation Et D'utilisation page 43

Boost function: The unit runs at maximum speed for 15 minutes. The LED's are flashing slowly. Hierna gaat hij terug naar
de vorige positie.
Deactivating
Briefly press the [+] button. The device returns to the selected mode.
De boost mode automatically stops when the water temperature is > 24°C when cooling or < 28°C when heating.
3.1. NOTIFICATIONS
Blue LEDs are flashing: the water temperature for cooling is too high
Red LEDs are flashing: the water temperature for heating is too low
Control panel error codes
LED flashes rapidly in the color of the set mode.
MODE MODE
MODE MODE
The LEDs are blinking in a pattern and in the color that matches the selected mode
Only if the window contact is connecrted and switched on: The window contact is open.
MODE
STRADA HYBRID TPT/B | MANUEL | 2024.07.01 | V.1.03
MODE MODE MODE
3 sec
Check the water temperature sensor
Check the room temperature sensor
EN
43