About this task
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
Figure 13. Removing the memory module
Steps
1. Pry the clips securing the memory module until the memory module pops-up.
2. Remove the memory module from the memory slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components or metallic contacts on the memory module as electrostatic discharge (ESD) can inflict
severe damage on the components. To read more about ESD protection,
Installation des modules de mémoire
Prérequis
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
À propos de cette tâche
La figure indique l'emplacement du module de mémoire et fournit une représentation visuelle de la procédure d'installation.
42
Retrait et installation de composants remplaçables par le client (CRU)
seeESD protection.