BWT AQUAMAT 3001 Notice D'installation Et De Maintenance page 16

1. Materials provided
‐ Motor and deck box
‐ Electrical panel for automatic cover
‐ Motor pin
‐ U-shaped pin
‐ Flywheel (in the case of an AQUAMAT motor)
2. Installing the motor
Orient the shaft so that the groove is facing upwards.
Insert the motor pin into the groove in the shaft.
Line the pin up with the groove in the hollow shaft and put the motor in position.
Push it in fully. In the case of resistance, check that the motor pin is properly positioned.
Put the U-shaped pin in position, making sure that it emerges underneath the throughwall flange.
Ref Description
1 Motor Aquamat 3001
2 Stainless steel shaft Ø30 mm
3 Motor pin
4 Stardeck throughwall flange
5 U shaped pin
PROTECTION & SÉCURITÉ
MOTOR DRIVE SYSTEM
Qty
1
1
1
2
2
16 2021/09 - Indice de révision : B - Code : 34690