Hoover HIFD440BC Mode D'emploi page 7

E`efdgUf[a`e Xad NeW
U^[d j^[ fem[h _i im_jY^[Z ed1 j^[ Xkpp[h m_bb
WdZ Wbb j^[ _dZ_YWjehi m_bb Yec[ ed \eh ed[ i[YedZ WdZ j^[d
]e ekj3 R^[ ^eX _i dem _d ijWdZXo ceZ[3 ObWY[ j^[ fWd _d
j^[ Y[djh[ e\ j^[ Yeea_d] ped[3
Operating instructions
1.Press the " " key, all the indicators show "--".
Select the power level by pressing the "+" or "-" key for the
relevant hotplate. To begin with the indicator shows" "or " "
by pressing the "+" or "-" key. Adjust up or down by pressing
the "+" or "-" key.
If you press the "+" and "-" keys simultaneously, the power
setting returns to" "and the cooking zone switches off.
NB : When the " " key is pressed, the induction hob returns
to standby mode if no other operation is carried out
within 1 minute.
*Under normal working mode, at any power levels, the
maximum total power of zone #1 and #2 is not higher than
3000W.
*Under normal working mode, at any power levels, the
maximum total power of zone #3 and #4 is not higher than
3000W.
Boost function
Press the" " key, the power level indicator showing "
Warning:
1. The boost function only operates for 5 minutes, after which
the cooking zone will revert to its original setting.
2. The boost function works on all cooking zones.
Cancelling the "BOOST" mode
Cancel the "Boost" mode by pressing the "+" or "-" key of the
corresponding zone.
iekdZ edY[
--
"
4 GB
6 GB
Timer function
If more than 1 zone is switched on :
activate the selected zone by pushing "+" or "-" key of that
zone,the corresponding digits will be flashing.
then press the " + " or " - " timer key
level indicator flashing and showing "
indicator flashes
To begin with the indicator shows"
pressing the "+" or "-" key. After setting the time, you can
select the power level of the cooking zone.
Then set the time for between 1 minute and 9 hours 59
minutes by pressing the "+" or "-" key.
Press the "+" key once increases the time by one minute ;
hold down the "+" key increases the time by 10 minutes ;
When the time exceeds 1 hour, hold down the "+" key
increases the time by 30 minutes .
Press the "-" key once decreases the time by one minute ;
hold down the "-" key decreases the time by 10 minutes ;
When the time exceeds 2 hours, hold down the "-" key
decreases the time by 30 minutes .
You can set the power level during the timer mode.
If the timer is set on more than 1 zone:
Timer can be set on all 4 cooking zones. When you set the
time for several cooking zones simultaneously, decimal
dots of the relevant cooking zones are on.
on the timer display will be shown the timer than will expire
first. The dot of the corresponding zone will be on but
flashing.Once the countdown timer expires the
corresponding zone will be switch off. Then it will be shown
the new first expiring timer and the corresponding zone will
have the dot flashing.
If the timer is set but not active on any zone, it will work
simply as timer countdown.
Note:
1. When the timer is 0 minute, the timer is cancelled.
2. When time elapses, the relevant cooking zone is switched
off.
3. After setting the timer, the timing indicator has been flashing
for 5 seconds, the set time will be automatically confirmed.
4. In timer mode, pressing the "+" or "-" key of the timer
simultaneously, timer setting returns to"0", time is cancelled.
power
" and the timer
:
",set the time by