Technical Data - Royalty Line EMG-1200.2 Mode D'emploi

• Disassemble by reversing the steps from
( fig.1-6) pictures.
• To remove the cutting plate easily, place a
screwdriver between the cutting plate and
the head as illustrated and lift it up (fig.l3).
• Press the lock button, and then turn the head
clockwise, the you can take out the head.
CLEANING
• Remove meat, etc. Wash each part in warm soapy water.
• Do not immerse the motor housing in water, but only wipe it with a
damp cloth and then dry it thoroughly.
• Wipe all the cutting parts by vegetable oil -wet cloth.
• Never use the bleaching solution containing chlorine or thinners or
petrol for cleaning.

TECHNICAL DATA:

Rated voltage: 220-240V~50/60Hz
Rated power: 1200W
KB 3min
Waste Management
The symbol above and on the product means that the
product is classed as Electrical or Electronic equipment and
should not be disposed with other household or commercial
waste at the end of its useful life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive
(2012/19/EU) has been put in place to recycle products using best
available recovery and recycling techniques to minimise the impact on
the environment, treat any hazardous substances and avoid the
increasing landfill. Contact local authorities for information on the
correct disposal of Electrical or Electronic equipment.