•
Keep the product clean. Signs and decals must be
fully visual.
•
This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To decrease the risk of serious
injury or death, we recommend persons with medical
implants to turn to their physician and the medical
implant manufacturer before operating this product.
Safety instructions for operation
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electrical
shock, fire and/or serious injury.
•
Do not cut asbestos materials.
•
When dry cutting, make sure the dust is removed
safely.
•
The information in this manual is not a replacement
for professional knowledge and experience. If you do
not feel safe in the situation that you are in, stop the
product. Do not use the product in unknown
situations.
•
Turn to Discount-equipment if you have questions
about the operation of the product. We can give you
information about how to operate your product safely
with best result.
•
Do not use a product, battery or battery charger that
is defective.
•
Do not touch a rotating cutting blade. It can cause
serious injuries or death.
•
Do not use the product in bad weather, for example,
heavy fog or rain, strong wind and intense cold. Bad
weather add risks such as ice on the ground.
•
Do not start a product unless all covers and guards
are assembled correctly.
•
Look around you. Make sure that there is no risk that
persons or animals touch or influence on your control
of the product.
•
Do not let children use or be near the product. The
product is easy to start. This can mean a risk of
serious injury.
•
Remove the battery when you do not have full view of
the product. Remove the battery if you will not use
the product for a long time.
•
You must be stable on your feet in order to have full
control of the product. Do not use the product if you
are on a ladder. Do not use the product if you are not
on stable ground.
8
•
Do not use the product above shoulder height.
•
If you are not careful, the risk of kickback increases.
•
Do not hold the product with one hand. This product
is not safely controlled with one hand.
•
Do not use a product in a situation where you can
not get for support if an accident occurs.
•
Make sure that you can move around safely.
Examine the conditions and the terrain around you
for possible obstacles.
•
Overexposure to vibration can lead to circulatory
damage or nerve damage in people who have
impaired circulation. Contact your doctor if you
experience symptoms of overexposure to vibration.
Such symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes in
skin colour or condition. These symptoms normally
appear in the fingers, hands or wrists. These
symptoms may be increased in cold temperatures.
•
It is not possible to include each possible situation
you can face when you use this product. Always be
careful and use your common sense.
•
Note: After operating the tool, hearing protection
must be lifted immediately when sawing is
completed to hear sounds and warning signals can
be heard.
745 - 008 - 12.11.2018