Publicité
Les langues disponibles
Les langues disponibles
Keypad
Problem
Cause
Warning indica-
Temperature
tor flashing.
deviation.
Overload. Cut-
ting attachment
is clogged.
The power trig-
ger and the
start button are
pressed at the
same time.
Green LED
Low battery
flashing.
voltage.
Warning indica-
Service.
tor is on.
Battery
Problem
Cause
Warning indica-
The battery is
tor flashing.
not charged.
Temperature
deviation.
To high volt-
age.
Warning indica-
Battery cells
tor is on.
difference is
too much (1V).
Battery charger
Problem
Warning indicator flashing.
Warning indicator is on.
Transportation and storage
•
The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
22
Troubleshooting
Solution
Let the product to cool down.
Clean the cutting attachment.
Release the power trigger.
Charge the battery.
Turn to your servicing dealer.
Solution
Charge the battery.
Use the battery in an environment where temperature are between -10 °C/14°F
and 40°C/104°F.
Check that the voltage on the battery is the same as the voltage on the rating
plate on the product. Remove the battery from the battery charger.
Turn to your servicing dealer.
Casue
Temperature deviation.
Transportation, storage and disposal
Solution
Use the battery an environment
where temperatures are between
5°C/41°F and 40°C/104°F.
Turn to your servicing dealer.
•
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
•
Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
745 - 008 - 12.11.2018
Publicité
