Publicité
Les langues disponibles
Les langues disponibles
2. Lock the shaft.
3. Tighten the bolt. The tightening torque for the bolt
holding the cutting blade is 30 Nm (18,5 ft-Ibs).
To examine the blade and the blade
guard
WARNING: A damaged cutting blade can
cause injury.
To do a function check before you
use the product
1. Do a check of the rear right hand guard (A) to make
sure that it is not damaged.
2. Do a check of the power trigger lockout (B) to make
sure that it operates correctly and that it is not
damaged.
3. Do a check of the keypad (C) to make sure that it
operates correctly.
4. Do a check to make sure that all parts and guards
are correctly attached and not damaged or missing.
5. Charge the battery and make sure that it is correctly
attached to the product.
14
1. Make sure that the cutting blade is attached correctly
and does not show signs of damage.
2. Make sure that the blade guard has no cracks or is
damaged.
3. Replace the blade guard if it is damaged. See
attach the cutting blade on page 13
Rope eyelet
The product has a rope eyelet. The rope eyelet can be
used to lift and lowering the product. Attach an
applicable strop to the rope eyelet to use it for lift and
lowering.
The rope eyelet can be used to attach the product to a
solid object to prevent it from fall and damage persons
or equipment.
Operation
6. Make sure that the power cutter stops when you
release the power trigger.
B
A
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
C
745 - 008 - 12.11.2018
To
Publicité
