KSIX OSLO Manuel D'utilisation page 3

How to attach the strap
The strap of the Oslo smartwatch is detachable, which allows it to be taken out for cleaning
to ensure proper maintenance. However, Ksix does not provide interchangeable straps
compatible with this model.
The shorter strap must be placed in the slot over the display and the longer strap in the slot
under the display, otherwise the insertion system may be irreparably damaged.
1. To place a strap: hold the strap, insert it into the corresponding slot. Slide one end of the
metal part into the hole on its side. Do the same with the other end.
2. To remove a strap: hold the strap and slide the metal piece out of its hole.
Charging
The full charge time of the Oslo smartwatch ranges from 2 to 3 hours and the battery can
last up to 5 days depending on usage.
Use the cable with a built-in wireless charging base that comes in the box in order to charge.
Make sure that the charging base is dry before you start charging.
To charge the device, connect the wireless charger to a power adapter or to the USB-A port
of your computer or any other compatible device. Place the watch face on top of the
spherical wireless charger and make sure that the Oslo display shows the charging icon.
Power on/off
To turn on the smartwatch, press the lower button for two seconds.
If you want to turn off the smartwatch after it has been turned on, press the lower button for
two seconds. To continue using the watch, tap on the "X" or press the upper button.
You can also turn it from the "Settings" section in the main menu or by swiping your finger
to the right and tapping on the "Power off" icon.
Initial setup
Tap here to download the MActive Pro app from Google Play or App Store.
1. Access your device's Bluetooth settings and turn on.
2. Download the MActive Pro app.
3. Follow the app instructions and create a profile.
You can also download the app directly from your App Store or Google Play.
MACTIVE PRO